Prep Work…
While the Chest extensions are drying, I’ll tackle the repairs on the Back plate…
Lots of deformation from my attempts to embed the reinforcement wires…
I had to use some heavy grit sandpaper…
And finally was able to knock down all of the high spots…
Now, to fill the cracks…
I’ll be using the super glue and baking soda method…
First, apply baking soda to the area…
making sure if fills in the crack…
Then apply super glue along the entire crack…
Once it’s dry…
Sand it smooth…
The super glue and baking soda method filled the crack pretty well, but there were a lot of low spots, so I applied some glazing & spot putty …
After a wet sanding with 220 grit sand paper.