More Fire Power…
As stated in my previous post, I want a larger Blaster to carry. So, I found what is supposed to be a very good 3D print file, and started the long printing process…
I’m using black PETG for this and starting out with the smaller parts…
These are the “alignment blocks”.
“Alignment blocks” removed from the build plate…
Next are the three “knobs” for the scope.
The three “knobs” fully printed.
The three “knobs” removed from the build plate.
Next is the “scope sight”.
The “scope sight” fully printed.
The “scope sight” removed from the build plate.
Next is the first part of the “front sight”.
Here are the “alignment blocks”, “scope knobs” and “scope site” all cleaned up…
The first part of the “front sight” fully printed.
The first part of the “front sight” removed from the build plate.
Next is the second part of the “front sight”.
The first part of the “front sight” all cleaned up.
The second part of the “front sight” fully printed.
The second part of the “front sight” removed from the build plate.
The second part of the “front sight” all cleaned up.
Next is the “scope clamp”.
The “scope clamp” fully printed.
The “scope clamp” removed from the build plate.
Next is the “magazine”.
The “scope clamp” all cleaned up.
The “magazine” removed from the build plate.
After twelve hours of non stop printing, I made a small amount of progress…