These Seem Simple Enough…
So far, so good…
The Pouches fronts are now attached to the backs…
From there, you just follow the seam around, sewing each panel together as you go…
Continue pinning the seam…
And sewing. Here, all three bottom seams are now attached…
Next, you pin up one side…
Then sew it…
And, pin up the final side…
And sew that…
The next step is to create the top edge hem, and attache the inner flaps, all at the same time. Make sure you are attaching the inner flaps on the OUTSIDE because the Pouch will get turned outside out and you want the inner flap attachment tabs to be INSIDE the Pouch…
Both Pouches with the top seams and inner flaps completed…
Here’s what the back looks like…
Both pouches, turned right side out…
The completed Pouches after attaching the front flaps to the main Pouches. This was probably the trickiest part because the bottom of the flap needs to be even with the bottom of the Pouch, and the top “tab” thing should be two inches tall. You are working with several layers of thick material, and your sewing machine may not like it. Mine didn’t…